<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Physical/Rheological Characteristics of Bitumen Modified by SBS, ZnO, TiO2 and EVA Precursors</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>189</FirstPage>
			<LastPage>202</LastPage>
			<ELocationID EIdType="pii">82255</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.309128.1329</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Fariba</FirstName>
					<LastName>Karimian</LastName>
<Affiliation>Department of Chemical Engineering, Islamic Azad University of Ilkhchi
Branch, Tabriz, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Younes</FirstName>
					<LastName>Beygi-Khosrowshahi</LastName>
<Affiliation>Chemical Engineering Department of Chemical Engineering , Faculty of Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>08</Month>
					<Day>31</Day>
				</PubDate>
			</History>
		    <Abstract>Owing to climate conditions, heavy traffic loads, and increasing axial loads, conventional bitumen/asphalt should be modified. Bituminous materials are also vulnerable to aging during construction and service time of pavement, which will seriously affect the service performance/life of bitumen pavement. To this end, bitumen was modified using styrene-butadiene-styrene (SBS), ZnO, TiO2 and ethylene vinylacelate (EVA). Applied methodology was Mixture Design and contents of SBS, ZnO, TiO2 and EVA were considered as independent variables. Response variables followed as: G*/sin OB, G*/sin RTFO, G*/sin PAV, RV, penetration (PEN), softening, ductility, m-value and stiffness. Results of experiments of penetration degree, softening point, and ductility performed on basic bitumen without any additives were 89, 49 °C, and 137, respectively. Effects of independent variables were investigated on response variables using mathematic models and optimized compositions. SBS, ZnO, TiO2 and EVA precursors positively affected the PEN parameter. Manipulated samples possessed penetration range of 48–62 (1/10mm). Maximum softening was reached at the highest EVA and the minimum softening was detected at the largest ZnO and TiO2. Softening point ranged in 59–71 °C. SBS, ZnO, TiO2 and EVA components positively increased ductility and the largest positive effect belonged to SBS. SBS and EVA positively affected G*/sin OB response, whereas ZnO and TiO2 variables negatively decreased it. Dynamic shear rheometric (DSR) data for aged bitumens within short term periods decreased from 52 to 76 °C for all investigated samples. All mentioned modifications were performed to optimize performance of ultimate bitumen from perspectives of softening, ductility, strength, m-value, stiffness, etc.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Modified bitumen</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">SBS</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ZnO</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">TiO2</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">EVA</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_82255_bfd09da6fe6440b4e0b52f17ae6b99bc.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Prediction of Bubble Point Pressure Using New Hybrid Computational Intelligence Models</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>203</FirstPage>
			<LastPage>222</LastPage>
			<ELocationID EIdType="pii">82258</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.314719.1341</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Naveshki</LastName>
<Affiliation>Department of Petroleum Engineering, Sahand University of Technology, Tabriz, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Ali</FirstName>
					<LastName>Naghiei</LastName>
<Affiliation>Faculty of Engineering, University of Garmsar, Garmsar, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Pezhman</FirstName>
					<LastName>Soltani Tehrani</LastName>
<Affiliation>Department of Petroleum Engineering, Kish International Campus, University of Tehran, Kish, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-4161-3818</Identifier>

</Author>
<Author>
					<FirstName>Mehdi</FirstName>
					<LastName>Ahmadi Alvar</LastName>
<Affiliation>Department of computer Engineering,  Faculty of Engineering, , Shahid
Chamran University, Ahwaz, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Hamzeh</FirstName>
					<LastName>Ghorbani</LastName>
<Affiliation>Young Researchers and Elite Club, Ahvaz Branch, 
Islamic Azad University, Ahvaz, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Nima</FirstName>
					<LastName>Mohamadian</LastName>
<Affiliation>Young Researchers and Elite Club, Omidiyeh Branch,
Islamic Azad University, Omidiyeh, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Jamshid</FirstName>
					<LastName>Moghadasi</LastName>
<Affiliation>Department of Petroleum Engineering
Petroleum Industry University, Ahvaz, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-1572-5074</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>12</Month>
					<Day>03</Day>
				</PubDate>
			</History>
		    <Abstract>Determining BPP is one of the critical parameters for the development of oil and gas reservoirs and have this parameter requires a lot of time and money. As a result, this study aims to develop a new predictive model for BPP that uses some available input variables such as solution oil ratio (Rs), gas specific gravity (γg), API Gravity (API). In this study, two innovatively combined hybrid algorithms, DWKNN-GSA and DWKNN-ICA, are developed to predict BPP. The outcomes of the study show the models developed are capable of predicting BPP with promising performance, where the best result was achieved for DWKNN-ICA (RMSE = 0.90276 psi and R2 = 1.000 for the test dataset). Moreover, the performance comparison of the developed hybrid models with some previously developed models revealed that the DWKNN-ICA outperforms the former empirical models with respect to perdition accuracy. In addition to presenting new techniques in the present study, the effect of each of the input parameters on BPP was evaluated using Spearman&#039;s correlation coefficient, where the API and Rs have the lowest and the highest impact on the BPP.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Bubble point pressure prediction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">DWKNN-ICA</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">hybrid computational intelligence</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">DWKNN-GSA</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Machine learning</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_82258_f67df43c184f6385704222b156d1760a.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Identification of Water Production Mechanism in One of Iran’s Oil Fields and Treat it With Gel Injection</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>223</FirstPage>
			<LastPage>242</LastPage>
			<ELocationID EIdType="pii">82333</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.312133.1334</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohsen</FirstName>
					<LastName>Shabibi</LastName>
<Affiliation>Petroleum Engineering, Sahand Oil &amp; Gas Research Institute, Petroleum and natural gas Engineering Faculty of Sahand University of Technology, Tabriz, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Eghbal</FirstName>
					<LastName>Sahraei</LastName>
<Affiliation>Petroleum Engineering, Sahand Oil &amp; Gas Research Institute, Petroleum and natural gas Engineering Faculty of Sahand University of Technology, Tabriz, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>10</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		    <Abstract>In this study, the problem of water production in one of Iran&#039;s oil reservoirs will be examined. First, using the flow rate diagram of oil and water production, the problem of water production will be examined according to time. Then, after confirming the occurrence of water production problem, the mechanism of water production will be investigated using Chan diagnostic diagrams and the created sector model. The results of this study indicate that firstly, the problem of water production in the well under study is observed, and secondly, according to the Decline-curve analysis diagrams, Recovery plot, Chan derivative diagram and schematic shape of the fluid flow movement, it shows the mechanism. Water production is a channel flow process under water injection. A gel treatment at early time with 25% of water cut was studied, for that it was modelled a gel treatment after 500 days of production.The main observation is that by increasing the concentration of injected gel, the rate of oil production increases and the rate of water production decreases. The concentration evaluated concentration was from 0 to 100 (lb/bbl) of solution, a stabilization concentration was not observed. Finally, first by identifying the type of water production mechanism for this reservoir in Iran, it has been determined that it has water production through the canal and then by using a simulation of gel injection, the water production rate has decreased and the oil production rate has increased.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Water Cut</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Channeling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">simulation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Diagnostic Plot</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Water Cut Control</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">treatment</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_82333_76dd81c480770b9affefaea5c325171d.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>On the Dynamic Contact Angle in Capillary Flows</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>243</FirstPage>
			<LastPage>256</LastPage>
			<ELocationID EIdType="pii">82387</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.318146.1346</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohammadmahdi</FirstName>
					<LastName>Kamyabi</LastName>
<Affiliation>Department of Chemical Engineering ,College of Engineering, Vali-e-Asr University of Rafsanjan, Rafsanjan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Ata</FirstName>
					<LastName>Kamyabi</LastName>
<Affiliation>Department of Chemical Engineering, College of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>01</Month>
					<Day>30</Day>
				</PubDate>
			</History>
		    <Abstract>The displacement of the contact line (CL) between two arbitrary immiscible flowing fluids was modeled. The present model is valid for a wide range of viscosity ratios of the phases. This is while the previously developed models reported in the literature were devoted to special cases i.e. high viscosity fluid pushing the low viscosity fluid. The present model reveals a direct relationship among the dynamic contact angle, the dimensionless pressure difference in the channel/tube, the Capillary numbers of both phases, and the characteristic length ratios of the channel/tube. The model was validated through the agreement of its predictions for the dynamic contact angle with the available data for a case of water-air flow inside a tube. Then, it was applied to more general cases with different viscosity ratios. According to the results, by increasing the ratio of the viscosity of the advancing phase to the viscosity of the receding phase, the dynamic contact angle reaches more quickly to its final value. It was also seen that by increasing the ratio of the length to the diameter of the tube the evolution of the dynamic contact angle becomes slower. The most interesting point is that a unique behavior is seen and a master curve is achieved if the time becomes dimensionless with a changing parameter (not a fixed parameter). This facilitates the way to predict and interpret the dynamic contact angle in the most general way.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Capillary number</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Microfluidics</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Dynamic contact angle</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Static contact angle</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Surface tension</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_82387_ff7b0eef017bdcd83eb91d26099512a8.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Using a New Mixture of Reagents for Effective Inhibition of Corrosion and Salt Precipitation in the Petroleum Industry</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>257</FirstPage>
			<LastPage>276</LastPage>
			<ELocationID EIdType="pii">82418</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.322527.1349</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Azizollah</FirstName>
					<LastName>Khormali</LastName>
<Affiliation>Department of Chemistry, Faculty of Basic Sciences and Engineering, Gonbad Kavous University, Gonbad Kavous, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-9100-2604</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>04</Month>
					<Day>23</Day>
				</PubDate>
			</History>
		    <Abstract>In recent years, universal inhibitors capable of inhibiting both corrosion and salts have attracted much attention in the petroleum industry. In this work, various industrial scale and corrosion inhibitors were used to develop a new mixture of reagents for the prevention of calcium carbonate, barium sulfate, calcium sulfate, and corrosion. The developed mixture of reagents (named DAHAPZ) consists of the following components: DTPMP, ATMP, HEDP, 2-aminoN-decyl-3-phenyl propionamide, 2-propyl-3-ethyl-8-oxychinolin – ZnCl2. When using DAHAPZ, an inhibition efficiency of more than 92% was observed for salts of CaCO3, BaSO4, and CaSO4) and corrosion (for a steel carbon in an acidic environment). After the application of DAHAPZ, the corrosion rate was reduced from 2 mm/year to 0.04 mm/year (an efficiency of 98%). The results of the impedance spectrum test showed that the optimal concentration of DAHAPZ for effective inhibition is 30 ppm. Furthermore, the turbidity test and the measurement of the amount of precipitated salts confirmed the high inhibition performance of DAHAPZ to prevent salt precipitation. DAHAPZ inhibits the salt crystals, which could serve as a protective barrier, thereby reducing the corrosion rate at various temperatures. The deceleration of the crystal growth rate when using DAHAPZ is associated with effective adsorption on the crystals, and a decrease in the crystal surface area for growth. Also, the results of coreflood experiments on the adsorption of the reagents onto the carbonate and sandstone rocks showed that DAHAPZ is more suitable to be used in carbonate reservoirs.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">َAdsorption Mechanism</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Carbonate and SulfateSalts</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Corrosion Inhibition</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Scale Inhibition</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Synergistic effect</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_82418_22e3bafe830bebf808c43d775c25584b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Estimation of Total Organic Carbon in Source Rocks by Using Back-propagation Artificial Neural Network and Passay Method-A Case Study</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>277</FirstPage>
			<LastPage>292</LastPage>
			<ELocationID EIdType="pii">82425</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.295002.1302</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Amir Hossein</FirstName>
					<LastName>Saeedi Dehaghani</LastName>
<Affiliation>Department of Petroleum Engineering, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-2721-6608</Identifier>

</Author>
<Author>
					<FirstName>Saeid</FirstName>
					<LastName>Sadeghnejad</LastName>
<Affiliation>Department of Petroleum Engineering, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0001-7386-4158</Identifier>

</Author>
<Author>
					<FirstName>Mohsen</FirstName>
					<LastName>Soltaninejad</LastName>
<Affiliation>Department of Petroleum Engineering, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Alireza</FirstName>
					<LastName>Tajikmansori</LastName>
<Affiliation>Petroleum Engineering Department, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>12</Month>
					<Day>31</Day>
				</PubDate>
			</History>
		    <Abstract>The purpose of this study is to calculate Total Organic Carbon (TOC) values of the Iranian field using a combination of sonic and resistivity logs (Passay method) and neural networks method in the conditions, where the core analysis or well-log measurement does not exist. We compared the resultant TOC with the ones obtained from the geochemical analysis. To correlate between the total organic carbon data and petrophysical log, which are available after logging, Multilayer Perceptron Artificial Neural Network is used. After analyzing 100 cutting samples by using rock -Eval pyrolysis, geochemical parameters have achieved.By using the multi-layer perceptron with Levenberg–Marquardt training algorithm, the TOC with correlation coefficient 0.88 and MSE 1.443 have been provided in the intervals without analyzed samples. Finally, the TOC was estimated by using separation of resistivity and the sonic log, although, with the favorable results in some other fields, the estimation had a correlation coefficient of 51% in this field. Comparing the performance of the multi-layer perceptron with Levenberg–Marquardt training algorithm (with an accuracy of 88%) and results of the Passay method (with an accuracy of 51%) indicated that the neural network is more accurate and has better consistency compared with the empirical formula.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Multi-Layer Perceptron</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Petrophysical logs</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Total Organic Carbon (TOC)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Passay Method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Levenberg–Marquardt Training Algorithm</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_82425_6ee7cf625d4e09457abf6fc919f04e65.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Multi-Objective Optimization of Different Channel Shapes in Heat Exchangers</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>293</FirstPage>
			<LastPage>318</LastPage>
			<ELocationID EIdType="pii">83056</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.324733.1351</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Saeid</FirstName>
					<LastName>Salimi</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-4856-7738</Identifier>

</Author>
<Author>
					<FirstName>Reza</FirstName>
					<LastName>Beigzadeh</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-2987-5420</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>05</Month>
					<Day>30</Day>
				</PubDate>
			</History>
		    <Abstract>The effect of geometric parameters of the zigzag, rectangular, and serpentine channels on convective heat transfer coefficient and pressure drop was investigated using computational fluid dynamics (CFD). In all channels, the same boundary conditions were considered, and the number of steps was equal to 10. The simulations were performed for turbulent flows (liquid water as the operating fluid), and Reynolds number (Re) range between 20000 and 60000 was selected. The zigzag channel showed a best thermal performance and the serpentine channel showed the best hydraulic performance. The thermal-hydraulic performance (THP) factor was employed for comparing the channels. As the complexity of the channels surfaces increased, the two parameters of convective heat transfer coefficient (positive factor) and pressure drop (negative factor) increased simultaneously. Therefore, predictive correlations for friction factor and Nusselt number were presented using genetic algorithm (GA), and the multi-objective optimization was performed to obtain the most appropriate Nusselt number and minimum friction factor as the two basic objective functions. The resulting Pareto set, which includes the optimum geometric dimensions of the heat exchangers, allows a designer to choice the geometries based on higher heat transfer or lower pumping power.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Heat exchanger</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Zigzag</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Rectangular</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Serpentine</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Computational fluid dynamics (CFD)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Genetic algorithm multi-objective optimization</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_83056_01bf4063bd804de84d70d5d565bd84d2.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Experimental Study of Low Speed Impact Test on the Fiber-Metal Composite Toughened with NBR Elastomer</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>319</FirstPage>
			<LastPage>337</LastPage>
			<ELocationID EIdType="pii">83124</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.326492.1354</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Davoud</FirstName>
					<LastName>Hashem Abadi</LastName>
<Affiliation>Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Amir</FirstName>
					<LastName>Kaveh</LastName>
<Affiliation>Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mahmoud</FirstName>
					<LastName>Razavizadeh</LastName>
<Affiliation>Faculty of Materials and Manufacturing engineering, Malek Ashtar University of Technology, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mahdi</FirstName>
					<LastName>Yarmohammadi Toski</LastName>
<Affiliation>Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Mahdi</FirstName>
					<LastName>Jafari</LastName>
<Affiliation>Department of Aerospace engineering, Malek Ashtar University of Technology, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>07</Month>
					<Day>01</Day>
				</PubDate>
			</History>
		    <Abstract>In this experimental study, low velocity impact test with different energy levels was performed on a fiber-metal (FML) structure reinforced with NBR elastomer. The FML structure consisted of a 2024 layer of aluminium as the core, two layers of NBR elastomer on both sides of the aluminium and a composite layer after the NBR layers, which were made by hand layup method. The composite layers were made of bi-direction carbon fiber fabric as well as phenolic resin. Also, the knocker was made from very high hardness and hit the FML sample with various energy levels (50, 58 and 66 joules). Thus, in the present paper, the effect of different composite thicknesses on the front and back of the core against the three impact energies was studied. One of the notable innovations in this work is the use of NBR elastomer, which acts as a reinforcement in withstanding impact loads. Based on the obtained results, the maximum and minimum amount of contact force, absorbed energy, deformation and contact time was related to P ... 2.2 and P … 1.1 samples. By comparing the P … 2.1 and P… 1.2 samples after the impact test, it was shown that P… 2.1 samples has a softer behaviour.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">FML</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">strike</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Energy</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Acrylonitrile Butadien</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Rubber</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_83124_dabf786cc465305db507121b993c343d.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigation of Operating Parameters on Ultrasound-Assisted Extraction of Anethole in Fennel Essential Oil</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>339</FirstPage>
			<LastPage>351</LastPage>
			<ELocationID EIdType="pii">83167</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.325123.1352</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Seyed Mohsen</FirstName>
					<LastName>Mirdehghan Ashkezari</LastName>
<Affiliation>Surface Phenomenon and Liquid-Liquid Extraction Research Lab, School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>H.</FirstName>
					<LastName>Bahmanyar</LastName>
<Affiliation>Surface Phenomenon and Liquid-Liquid Extraction Research Lab, School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Hedayat</FirstName>
					<LastName>Azizpour</LastName>
<Affiliation>Surface Phenomenon and Liquid-Liquid Extraction Research Lab, School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Mohammadi</LastName>
<Affiliation>Surface Phenomenon and Liquid-Liquid Extraction Research Lab, School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Iman</FirstName>
					<LastName>Najafipour</LastName>
<Affiliation>Fouman Faculty of Engineering, College of Engineering, University of Tehran, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>06</Month>
					<Day>05</Day>
				</PubDate>
			</History>
		    <Abstract>In this paper, the operational impact of three parameters including power of ultrasonic apparatus, size of fennel seeds and experiment time on the extraction yield of Anethole, which is the main considerable component in fennel essential oil and its concentration have been studied through Ultrasound-Assisted Extraction. The ultrasonic extraction of oil from fennel seeds using a solution of 70% water-ethanol was studied at different particle sizes, different ultrasonic powers and three different levels of time. The most effective parameter was particle size, while the experiment time had the least impact on both the efficiency and Anethole concentration as well. As a result, compared to Soxhlet method, the ultrasonic-assisted extraction was more efficient. In this experiment, eighteen constituents were identified for fennel seeds using GC–MS. The major components were Anethole (78.12%), Fenchone (8.81%), Limonene (4.39%), and Estragole (4.52%). Furthermore, the analysis of two quadratic models using the Box-Behnken design (BBD) indicated that the quadratic polynomial model can be applied for estimating the Anethole extraction yield as well as Anethole concentration.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Fennel</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Anethole</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">soxhlet</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Ultrasound-assisted</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">extraction</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_83167_faff78ae9252e2aa0f2b9f721cb89398.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Optimizing SO2 Adsorption from Flue Gas Using Microporous Polypropylene Hollow Fiber Membrane Contactor</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>353</FirstPage>
			<LastPage>367</LastPage>
			<ELocationID EIdType="pii">83749</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.327898.1356</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Somayeh</FirstName>
					<LastName>Alijani</LastName>
<Affiliation>Energy and Environment Research Center, Niroo Research Institute, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-2619-3993</Identifier>

</Author>
<Author>
					<FirstName>Ramin</FirstName>
					<LastName>Paydar Ravandi</LastName>
<Affiliation>Energy and Environment Research Center, Niroo Research Institute, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>07</Month>
					<Day>31</Day>
				</PubDate>
			</History>
		    <Abstract>This study optimized the operational parameters of removing SO2 from flue gas via a polymeric hollow fiber membrane contactor (HFMC) using the response surface methodology (RSM). The distilled water and polypropylene hollow fibers were applied as the adsorbent and membrane material, respectively. Three experimental parameters were chosen as independent variables: liquid flow rate, gas flow rate, and initial SO2 concentration. The SO2 removal efficiency was significantly affected by the initial SO2 concentration. The optimal ratio of liquid-to-gas flow rate was found to be 0.25 to reach maximum separation efficiency (98.81%). The optimal value of the liquid flow rate was 33 l/h, and the optimal gas flow rate was 131 l/h. The effect of CO2 presence, module length, fibers number, temperature, and the adsorbent nature were also investigated under optimal values obtained for the ratio of liquid-to-gas flow rate. Results indicated that CO2 presence in the flue gas slightly affects SO2 removal using water as an absorbent in HFCM. Furthermore, it was indicated that the SO2 removal efficiency was a function of the flue gas temperature and number of fibers: it decreased as the temperature rose from 20 to 50°C and the fiber numbers increased from 300 to 1000. This study offers a model to predict the efficiency of SO2 removal using HFMC under different conditions and provides the ground to further explore the industrial applications of this technology.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Flue gas</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Membrane Contactor</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Optimization operational parameters</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">RSM</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">SO2 removal</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_83749_d8cb3840d7c1fad535ea70d61f867629.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The Influence of Bimodal Heterogeneity on Viscous Fingering of a Miscible Interface in Porous Media</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>369</FirstPage>
			<LastPage>383</LastPage>
			<ELocationID EIdType="pii">83778</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.329188.1359</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mozhdeh</FirstName>
					<LastName>Sajjadi</LastName>
<Affiliation>School of Chemical Engineering, College of Engineering, University of Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-8626-2153</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>08</Month>
					<Day>29</Day>
				</PubDate>
			</History>
		    <Abstract>The flow regimes and the dynamics of the front in miscible displacements are controlled by the interactions between the mechanisms of instability involved in such processes. The instabilities may be driven by unfavorable gravity or mobility ratios or by the heterogeneity of the medium providing favorable paths for the more mobile fluid. In this work, the effect of porous medium heterogeneity with two scales of permeability variations on the frontal instability and fluid mixing have been investigated. The base mode of permeability variations has a smaller wavelength and higher frequency while the imposed mode has a larger wavelength. The effect of such a bimodal heterogeneity on the growth of mixing zone length (MZL) has been studied and the development of the previously recognized flow regimes in layered porous media have been examined. Compared to the unimodal medium comprising the base wave, in the bimodal cases with large contrast between the wavelengths of the two periodic profiles the dominance of each wave length at a different time scale predictably enhances the growth of fingers in the early and late stages. Interestingly and less intuitively, even in cases with close wave numbers between the combined modes faster growth of the mixing zone length is observed. In such cases, the coherence of equal layers in a unimodal layered medium is disturbed by the second wave number resulting in fading of the lateral diffusion regime. However, bimodal heterogeneity may attenuate the instability compared to the unimodal system with the imposed wave’s frequency.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Channeling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Spectral method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Nonlinear Modeling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Numerical simulation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Carbonate rocks</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_83778_ed8dc6e319052463afc4c3a019fe0ad2.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Chemical and Petroleum Engineering</JournalTitle>
				<Issn>2423-673X</Issn>
				<Volume>55</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigating the Adsorption of the Thyroid Stimulating Hormones Molecules on Graphene Sheets by the Density Functional Theory for Possible Nano-Biosensor Applications</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>385</FirstPage>
			<LastPage>392</LastPage>
			<ELocationID EIdType="pii">84617</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jchpe.2021.305285.1319</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Nadia</FirstName>
					<LastName>Mahmoudi Khatir</LastName>
<Affiliation>Department of Biotechnology, Faculty of Biological Science, Alzahra University, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Hooman</FirstName>
					<LastName>Fatoorehchi</LastName>
<Affiliation>Chemical Engineering, University of Tehran, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Aidin</FirstName>
					<LastName>Ahmadi</LastName>
<Affiliation>Computational Materials Science Laboratory, Nano Research and Training Center, NRTC, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Akram</FirstName>
					<LastName>Khoshnoodfar</LastName>
<Affiliation>Department of Biotechnology, Faculty of Biological Science, Alzahra University, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Mahdi</FirstName>
					<LastName>Faghihnasiri</LastName>
<Affiliation>Computational Materials Science Laboratory, Nano Research and Training Center, NRTC, Iran.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>06</Month>
					<Day>29</Day>
				</PubDate>
			</History>
		    <Abstract>In this paper, the electronic effects of the adsorption of thyroid stimulating hormones (TSH) on two-dimensional structures of graphene and ψ-graphene are theoretically investigated by means of the density functional theory (DFT). Initially, the binding energies of TSH molecules on graphene (both the zigzag and armchair structures) and ψ-graphene are computed at different spatial orientations using the Siesta code. The most stable orientations had the following binding energies: –1.04 eV for triiodothyronine on graphene, –1.25 eV for thyroxine on graphene, –0.97 eV for triiodothyronine on ψ-graphene, and –0.95 eV for thyroxine on ψ-graphene. Subsequent to identifying the most stable orientations, the current-voltage characteristics of graphene and ψ-graphene monolayers, before and after the adsorption of TSH molecules are calculated by the TranSiesta computational software package, using the non-equilibrium Green’s function approach. The adsorption of the TSH molecules on the both graphene structures reduced the passing electric current significantly. The findings show that graphene sheets can be used to synthesize fast responding TSH nano-biosensors.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">graphene</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ψ-graphene</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">thyroid hormones adsorption</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Density functional theory</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">I-V characteristics</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">nano-biosensor</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jchpe.ut.ac.ir/article_84617_d77f65e73e23a6f63160f27eb1afe2f5.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
