Optimization of Dogleg Severity in Directional Drilling Oil Wells Using Particle Swarm Algorithm (Short Communication)

Document Type: paper

Authors

1 Mechanical Engineering, Islamic Azad University, Ahwaz Branch, Ahvaz, Iran

2 Faculty of Mechanic, Ahwaz Chamran University, Ahvaz, Iran

3 Faculty of Petroleum, Petroleum University of Technology, Ahwaz, Iran

Abstract

The dogleg severity is one of the most important parameters in directional drilling. Improvement of these indicators actually means choosing the best conditions for the directional drilling in order to reach the target point. Selection of high levels of the dogleg severity actually means minimizing well trajectory, but on the other hand, increases fatigue in drill string, increases torque and drag, particularly in the rotation mode. Therefore the aim is to define the index in an optimal range which meets both requirements. Particle swarm algorithm was used for optimization the dogleg severity. The final measured depth and directional well pattern were considered as an objective function and Build & Hold, respectively. Then the fatigue caused by the stresses exerted on the drill string, evaluated by modified Goodman equation simultaneously. The relationship between path parameters and the obligation to reach a target point in directional wells, converts the problem into a constrained optimization problem. Comparing the proposed directional drilling path in a drilled well in the Ahwaz oilfield with the responses obtained from the particle swarm algorithm indicated that the particle swarm algorithm is converged in finding the shortest path, and on the other hand, it decreases the time of using directional drilling equipment due to the selection of the proper dogleg severity. Note that it is likely to add other constraints to the optimization process which indicates the particle swarm algorithm efficiency in solving these problems.

Keywords


[1]  Sampaio,  H.B.J. (2006).  "Planning  3d  well  trajectories  using  cubic  functions."  J.  Energy  Resour.Technol., Vol. 128, No. 4, pp. 257-267.

[2] Guo, Y. and  Feng, E. (2008). "Nonlinear dynamical systems if trajectory design for 3d horizontal well and their optimal controls." J. Comput. Appl. Math., Vol. 212, No. 2, pp. 179-186.

[3] Zhang,  J.B.,  Xin Liu,  X.  and Hong  Lv, X.  (2012).  "Multi-objective optimization  method  for  borehole  trajectory design of directional well."  Appl. Mech. Mater., Trans Tech Pub., Switzerland, Vol.152, pp. 816-819.

[4] Shokir, E.M., Emera, M.K, Eid, S.M. and Abd Wally, A.A.W. (2004). ''Optimal 3-d directional  &, horizontal wells planning using genetic algorithm.'' Oil Gas.  Sci.  Technol., Vol. 59, No. 3, pp. 255-266.

[5] Nogueira, P.D.B. and  Schiozer, D.J. (2009). "An efficient methodology of production strategy optimization based  on  genetic algorithms." Latin American and Caribbean  Petroleum  Engineering  Conference, Cartagena de Indias, Colombia.

[6] Sampaio, H.B.J. (2007). Advanced Drilling Practices, Curtin: Curtin University of Technology, Australia.

[7] Aadnoy, B.S. (2008). "Theory and application of new generalized model for torque and drag." IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Jakarta, Indonesia.

[8] Keith, J.N. and  Budynas, R.G.(2006). Shigley's Mechanical Engineering Design, 8th.Ed, McGraw-Hill, USA.

[9] Engelbrecht, P. and   Andries.A. (2007). Computational Intelligence, 2.Ed, John Wiley & Sons Ltd, South Africa.

[10] Lazinica, A. (2009). Particle Swarm Optimization, In.Tech, Croatia.