[2] Anis S F, Singaravel G and Hashaikeh R (2018) Hierarchical nano zeolite-Y hydrocracking composite fibers with highly efficient hydrocracking capability. RSC advances, 830: 16703-16715. https://doi.org/DOI: 10.1039/C8RA02662A.
[3] Bouchy C, Hastoy G, Guillon E and Martens J (2009) Fischer-Tropsch waxes upgrading via hydrocracking and selective hydroisomerization. Oil & Gas Science and Technology-Revue de l'IFP, 641: 91-112. https://doi.org/DOI: 10.2516/ogst/2008047.
[5] Kayukova G, Mikhailova A, Kosachev I, Feoktistov D A and Vakhin A (2018) Conversion of heavy oil with different chemical compositions under catalytic aquathermolysis with an amphiphilic Fe-Co-Cu catalyst and kaolin. Energy & fuels, 326: 6488-6497.
https://doi.org/https://doi.org/10.1021/acs.energyfuels.8b00347.
[10] Kham-or P, Suwannasom P and Ruangviriyachai C (2016) Effect of agglomerated NiMo HZSM-5 catalyst for the hydrocracking reaction of Jatropha curcas oil. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 3824: 3694-3701. https://doi.org/
https://doi.org/10.1080/15567036.2016.1166165.
15] Liang J, Liang Z, Zou R and Zhao Y (2017) Heterogeneous catalysis in zeolites, mesoporous silica, and metal–organic frameworks. Advanced Materials, 2930: 1701139.
https://doi.org/10.1002/adma.201701139.
[16] Liu J, He J, Wang L, Li R, Chen P, Rao X, Deng L, Rong L and Lei J (2016) NiO-PTA supported on ZIF-8 as a highly effective catalyst for hydrocracking of Jatropha oil. Scientific reports, 61: 1-11.
https://doi.org/https://doi.org/10.1038/srep23667.
[17] Manrique C, Guzmán A, Pérez-Pariente J, Márquez-Álvarez C and Echavarría A (2016) Vacuum gas- oil hydrocracking performance of Beta zeolite obtained by hydrothermal synthesis using carbon nanotubes as mesoporous template. Fuel, 182236-247.
https://doi.org/https://doi.org/10.1016/j.fuel.2016.05.097.
[19] Okunev A, Parkhomchuk E V e, Lysikov A I, Parunin P D, Semeykina V and Parmon V N (2015) Catalytic hydroprocessing of heavy oil feedstocks. Russian chemical reviews, 849: 981.
https://doi.org/DOI 10.1070/RCR4486.
[25] Subsadsana M, Sansuk S and Ruangviriyachai C (2018) Enhanced liquid biofuel production from crude palm oil over synthesized NiMoW-ZSM-5/MCM-41 catalyst. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 402: 237-243.
https://doi.org/https://doi.org/10.1080/15567036.2017.1411992.
[26] Sun C, Zhan T, Pfeifer P and Dittmeyer R (2017) Influence of Fischer-Tropsch synthesis (FTS) and hydrocracking (HC) conditions on the product distribution of an integrated FTS-HC process. Chemical Engineering Journal, 310272-281.
https://doi.org/https://doi.org/10.1016/j.cej.2016.10.118.
[28] Trépanier M, Tavasoli A, Dalai A K and Abatzoglou N (2009) Co, Ru and K loadings effects on the activity and selectivity of carbon nanotubes supported cobalt catalyst in Fischer–Tropsch synthesis. Applied Catalysis A: General, 3532: 193-202.
https://doi.org/https://doi.org/10.1016/j.apcata.2008.10.061.
[30] Upare D P, Park S, Kim M, Jeon Y-P, Kim J, Lee D, Lee J, Chang H, Choi S and Choi W (2017) Selective hydrocracking of pyrolysis fuel oil into benzene, toluene and xylene over CoMo/beta zeolite catalyst. Journal of Industrial and Engineering Chemistry, 46356-363.
https://doi.org/https://doi.org/10.1016/j.jiec.2016.11.004.
[32] Weiss W, Guibard I and Dastillung R (2018) Process for hydroconverting oil feeds in fixed beds to produce low sulphur fuels. In: Google Patents.
[35] Yuan L, Wang X, Zhao K, Pan H, Li Q, Yang J and Zhang Z (2017) Effect of reaction temperature and hydrogen donor on the Ni0@ graphene-catalyzed viscosity reduction of extra heavy crude oil. Petroleum Science and Technology, 352: 196-200.
https://doi.org/https://doi.org/10.1080/10916466.2016.1241805.
[36] Yusefabad E T, Tavasoli A and Zamani Y (2018) Effective catalyst to produce naphtha from vacuum gasoil hydrocracking and discrete lump modeling. Petroleum & Coal, 601. https://doi.org/Corpus ID: 195890031.
[37] Bamdadi M, Bozorg A, Tavasoli A, Shateri S, Andache M (2019) Synthesis of Meso/Macroporous γ‐ Alumina via Aluminum Pellet with Controllable Porosity: Ammonium Bicarbonate Influences through Drying and Calcination Steps. Chemistry Select 4 (19), 5872-5879.
https://doi.org/10.1002/slct.201900523.
[38] Hashemi H, Behnejad H, Rosendahl, L Tavasoli A (2022) Tuning the porosity and physicochemical properties of SBA-15: RSM-assisted optimizing of traditional sol–gel process , Chemical Papers vol 76, 4541-4560.
https://doi.org/10.1007/s11696-022-02187-z.
[39] Salimi M, Tavasoli A, Rosendahl L (2020) Optimization of γ-alumina porosity via response surface methodology: the influence of engineering support on the performance of a residual oil hydrotreating catalyst, Microporous and Mesoporous Materials 299, 110124.
https://doi.org/10.1016/j.micromeso.2020.110124.
[40] LB. Liu, H. Lv, X. Cui, G. Sun, X. Zhang, B. Dong, Y. Li, Y. Pan, Y. Chai, C. Liu, Preparation of presulfided oil-soluble NiMo catalyst for slurry bed hydrocracking of vacuum residue, Chemical Engineering Journal, 498 (15), 2024.
https://doi.org/10.1016/j.cej.2024.155166.
[41] D. Dhaneswara, J. Fatriansyah, T. Sudiro, S. Harjanto, M. S. Mastuli, A. Federico, R. Ulfiati, Synthesis and optimization of Ni/Mo-impregnated kaolin-based ZSM-5 as a catalytic hydrocracking catalyst for heavy petroleum distillates, Sustainable Energy & Fuels, 12, 2024.
https://doi.org/10.1039/d3se01573d.
[42] K.K. Ferreira, C. Di Stasi, A. Ayala-Cortés, L.S. Ribeiro, J.L. Pinilla, I. Suelves, M.F.R. Pereira, Hydroprocessing of waste cooking oil to produce liquid fuels over Ni-Mo and Co-Mo supported on carbon nanotubes, Biomass and Bioenergy, 91, 2024.
https://doi.org/10.1016/j.biombioe.2024.107480.