New Method for Calculation Mixing Rule and Modification Semi-empirical Models for Solubility Modeling in Supercritical Solvent

Authors

1 سازمان انرژی اتمی

2 مهندسی شیمی

Abstract

The critical properties of a solute are required for modeling of the solubility by the equation of state. For many compounds, the critical properties are not available. So, group contribution method is utilized as a common method to estimate these properties. But, it leads to the consecutive errors in calculations of the solubility modeling. In this study, Soave-Redlish-Kowang (SRK) and Peng-Robinson equation of states with Huran-Vidal mixing rules were used for modeling of the solubility. A new method for evaluating of C2 (Huran-Vidal mixing rule parameter) is recommended as a function of temperature and pressure. For solubility modeling by semi-empirical correlation, the new forms of Chrastil and Mendez equations were used. Finally, the modeling of solubility for 20 compounds by these methods has been investigated. Results show that the AARD% for the models with semi-empirical equations (Charstil, Aguilera, Gordillo, Mendez, modified Charstil and modified Mendez) are 12.07, 11.71, 34.89, 19.89, 11.17 and 15.70 respectively; and for SRK, PR EOS are 14, 19.85 respectively.

Keywords


1- Lee, J. M. and Soong,Y. (1985). "Effects of surfactants on the liquid-liquid dispersion in agitated vessels."
Ind. Eng. Chem. Process Des. Deu., Vol. 24 ,PP. 118-121.
2- Hoffer, M. S. and Resnick, W. (1979). "A study of agitated liquid-liquid dispersions." Chem. Eng. Res. and
Des. Vol. 57, PP. 8-14.
3- Tcholakova, S., Denkov, N. D. and Danner, T. (2004). "Role of surfactant type and concentration for the
mean drop size during emulsification in turbulent flow." Langmuir, Vol.20, No. 18, PP. 7444-7458.
4- Skelland, A.H.P. and Jeffrey, S. (1998). "Transient drop size in agitated liquid-liquid systems, as influenced
by the direction of mass transfer and surfactant concentration." Ind. Eng. Chem. Res., Vol. 31, PP. 2556-
2563.
5- Zhou, G. and Kresta, S.M.(1998). "Evolution of drop size distribution in liquid-liquid dispersions for various
impellers.” Chem. Eng. Sci., Vol. 53, No. 11, PP. 2099-2113.
6- Desnoyer, C., Masbernat, O. and Gourdon, C. (2003). “Experimental study of drop size distributions at high
phase ratio in liquid–liquid dispersions.” Chem. Eng. Sci., Vol. 58, PP. 1353 – 1363.
7- Calabrese, R. V., Chang, T. P. K., and Dang, P. T. (1986).” Drop breakup in turbulent stirred-tank contactors.
”AICHE, Vol. 32, No .4, PP. 657–666.
8- Baldyga, J., Bourne, J. R., Pacek, A. W., Amanullah, A. and Nienow, A.W. (2001). “Effects of agitation on
drop size in turbulent dispersions: Allowance for intermittency.” Chem. Eng. Sci., Vol. 56, PP. 3377–3385.
9- Lagisetty, J. S. , Das, P. K., Kumar, R., and Ghandi, K. S. (1986).” Breakage of viscous and non-newtonian
drops in stirred dispersions.” Chem. Eng. Sci., Vol. 41, No. 1, PP. 65–72.
10- Doulah, M. S. (1975)." An effect of hold-up on drop sizes in liquid–liquid dispersions.” Industrial and
Engineering Chemistry Fundamentals, Vol. 14, No. 2, PP. 137–138.
11- Singh, K.K., Mahajani, S.M., Shenoy, K.T. and Ghosh, S.K. (2008). "Representative drop sizes and drop
size distributions in A/O dispersions in continuous flow stirred tank." Hydrometallurgy, Vol. 90, PP. 121-
136.