Simulation of Separation of a Racemic Mixture of Ibuprofen by Supercritical Fluid Chromatography in Simulated Moving Bed

Document Type : Research Paper

Authors

Sharif University of Technology, Chemical and Petroleum Engineering Department

Abstract

Separation of a racemic mixture of ibuprofen at a low concentration level by supercritical fluid chromatography in a simulated moving bed (SFC-SMB) is investigated by simulation. The feasibility of ibuprofen enantiomers separation has been experimentally examined in the literature. Our simulation results show that separation of ibuprofen enantiomers is feasible by this method, and R-ibuprofen and S-ibuprofen products with purity of over 99% can be obtained, which agrees with experimental data in the literature. For initial studies, the triangular theory is used to find the operating conditions. This simulation shows that the application of the triangular diagram is valuable in cases where none of the operating conditions is available. The operating point conditions, such as streams flow rates and switching time, are obtained with this method. Also, the effect of the location of the selected operating points in the triangular diagram on operating conditions, purity, and concentration of the products are investigated. In triangle theory, the optimal operating point should be near the vertex of the triangle diagram with a safety margin, to obtain products with high purity. The simulation also confirms that selecting the operating point away from the vertex of the triangular diagram will lead to diluted products.

Keywords


[1] Gomes, P.S. (2009). “Advances in Simulated Moving Bed; New Operating Modes; New Design Methodologies; and Product (FLEXSMB-LSRE) Development.” PhD thesis, University of Porto, Portugal.
[2] (2011). “Aspen Chromatography tutorial Help Version: V7.3.”
[3] Choi, J.H., Kang, M.S., Lee, C.G., Wang, N.H.L. and Mun, S. (2017). “Design of simulated moving bed for separation of fumaric acid with a little fronting phenomenon.” Journal of Chromatography A, Vol. 1491, pp. 75-86.
[4] Hasan, M.M.F., First, E.L. and Floudas, C.A. (2016). “Discovery of novel zeolites and multi-zeolite processes for p-Xylene separation using simulated moving bed (SMB) chromatography.” Chemical Engineering Science, Vol. 159, pp. 3-17
[5] Peper, S., Lubbert, M., Johannsen, M. and Brunner. (2002). “separation of ibuprofen enantiomers by supercritical fluid simulated moving bed chromatography.” Separation Science and Technology, Vol. 37 (11), pp. 2545-2566.
[6] “en.wikipedia.org.” [Online]. Available: http://en.wikipedia.org/wiki/Thalidomide.
[7] Yaoa, C., Tangb, S., Yaoc, H.M. and Tade, M.O. (2013). “Continuous prediction technique for fast determination of cyclic steady state in simulated moving bed process.” Computers and Chemical Engineering, vol. 58, pp. 298-304.
[8] Katsuo, S., Langel, C., Sandré, A.L. and Mazzotti, M. (2011). “Intermittent simulated moving bed chromatography: 3. Separation of Tröger’s.” Journal of Chromatography A, Vol. 1218 (52), pp. 9345-9352.
[9] Pais, L.S., Loureiro, J.M. and Rodrigues, A.E. (1997). “Modeling, simulation and operation of a simulated moving bed for continuous chromatographic separation of 1,19-bi-2-naphthol enantiomers.” Journal of Chromatography A, Vol. 769, pp. 25-35.
[10] Dunnebier, G., Weirich, I. and Klatt, K. (1998). “Computationally efficient dynamic modelling and simulation of simulated moving bed chromatographic processes with linear isotherms.” Chemical Engineering Science, Vol. 53 (14), pp. 2537-2546.
[11] Wei, F., Shen, B., Chen, M. and Zhao, Y. (2012). “Study on a pseudo-simulated moving bed with solvent gradient for ternary separations.” Journal of Chromatography A, Vol. 1225 (17), pp. 99-106.
[12] Pais, L.S., Loureiro, J.M. and Rodrigues, a.A.E. (1998). “Modeling Strategies for Enantiomers Separation by SMB Chromatography.” AIChE Journal, Vol. 44 (3), pp. 561-569.
[13] Storti, G., Mazzotti, M., Morbidelli, M. and Carra, S. (1993). “S. Robust Design of Binary Countercurrent Adsorption Separation Processes.” AIChE Journal, Vol. 39, pp. 471-492.
[14] Mazzotti, M., Storti, G. and Morbidelli, M. (1997). “Optimal operation of simulated moving bed units for nonlinear chromatography separations.” Journal of Chromatography A, Vol. 769, pp. 3-24.
[15] Choi, Y. J., Han, S.C. and Chung, S.T. (2007). “Separation of Racemic Bupivacaine Using Simulated Moving Bed with Mathematical Model.” Biotechnology and Bioprocess Engineering, Vol. 12, pp. 625-633.
[16] Denet, F., Hauck, W. and Nicoud, R.M. (2000). “Continuous Supercritical Fluid Chromatographic Separation of Enantiomers in a Simulated Moving Bed Unit.” International Symposium on Supercritical Fluids, Atlanta, USA.
[17] Depta, A., Giese, T., Johannsen, M. and Brunner, G. (1999). “Separation of Stereoisomers in a Simulated Moving Bed-Supercritical Fluid Chromatography Plant.” Journal of Chromatography A, Vol. 865, pp. 175–186.
[18] Clavier, J. (1996). “ A New Fractionation Process: The Supercritical Fluid Simulated Moving Bed.” in Seventh International Symposium on Supercritical Fluid Chromatography and Extraction, Indianapolis.
[19] Mazzotti, M., Storti, G. and Morbidelli, M. (1997). “ Supercritical Fluid Simulated Moving Bed Chromatography.” Journal of Chromatography A, Vol. 786, pp. 309-320.
[20] Johannsen, M. (2007) “Modeling of Simulated Moving-bed Chromatography, in Modeling of Process Intensification (ed F. J. Keil)”, Wiley-VCH Ver-lag GmbH & Co. KGaA, Weinheim, Germany.
[21] “http://en.wikipedia.org/.” [Online]. Available: http://en.wikipedia.org/wiki/Ibuprofen.
[22] Johannsen, M. (2001). “Separation of Enantiomers of Ibuprofen on Chiral Stationary Phases by Packed Column Supercritical Fluid Chromatography.” Journal of Chromatography A, Vol. 937 (12), pp. 135-138.
[23] Long, N.V.D., Thai-Hoang Le, J.I.K., Lee, J.W. and Koo, Y.M. (2009). “Separation of D-psicose and D-fructose using simulated moving bed chromatography.” Journal of Separation Science, Vol. 32, pp. 1987-1995.
[24] Minceva, M. and Rodrigues, A.E. (2002). “Modeling and Simulation of a Simulated Moving Bed for the Separation of p-Xylene.” Industrial & Engineering Chemistry Research, Vol. 41, pp. 3454-3461.