Preparation of Pt/Al2O3-Cl Catalyst and Investigation of Operating Variables Effects on Isomerization Reaction

Document Type : Research Paper

Authors

1 Faculty of Chemical, Petroleum and Gas Eng., Semnan University, Semnan, Iran

2 Research Institute of Petroleum Industry (RIPI), Tehran, Iran

Abstract

A high chlorinated alumina catalyst obtained by treating Pt/γ-Al2O3 (0.25 wt. % Pt) samples with two mixtures of CCl4/N2 and CCl4/N2/H2 was tested for the hydroisomerization of C6 alkane. The conversion of n-hexane feed was diluted with hydrogen performed with different H2/HC ratios at various temperatures, liquid hourly space velocities (LHSVs) and 3MPa total pressure. The catalyst introduced in the reactor displayed a fairly high initial activity, but conversion slowly declined with time on stream. Adding CCl4 to the hexane feed could not improve the stability with time on stream. The effects of temperature on conversion and isomer selectivity were studied at various H2/HC ratios and LHSVs. Superior conversion and selectivity were found for the catalyst at 160 ˚C and 120 ˚C at LHSV 1.2 h-1. Furthermore, effects of LHSV and low temperature were studied on conversion and product octane number derived from hexane isomerization, respectively. The highest octane number was observed at the low space velocity (1.2 h-1).

Keywords


[1] Chao,  C.,  Lizhen, Q.  and Xiaorong,  C.  (2009) .  "Catalytic  performance   of Re/Ga2  O3 /WO3 /ZrO2 catalyst   for n-hexane isomerization ." Chinese  Journal of  Catalysis ,  Vol.  30,  No. 9, pp.  859 – 863.
[2] Valavarasu,  G.  and   Sairam,  B.  (2013).  "Light  naphtha isomerization:  A Review."  Petroleum  Science  and Technology, Vol. 31, No. 6, pp.  580- 595.
[3] Deak,  V.,  Rosin,  R. and  Sullivan,  D. (2008).  "Tutorial:  Light naphtha isomerization ."   Research and Development, UOP LLC, 25 E. Algonquin Road, Des  Plaines, IL 60017,
[4] Adzamic,  Z.,  Adzamic,  T.,  Muzic, M.  and  Sertic- Bionda, K.  (2013).   "Optimization  of  the  n-hexane isomerization   process   using   response   surface   methodology ."  Chemical   Engineering    Research  and Design , Vol. 91, No. 1, pp. 100 -105.
[5] Volkova,  G.G.  and   Reshetnikov,  S.I.,  Shkuratova,  L.N.,  Budneva  A.A., Paukshtis, E.A.  (2007).  " n-Hexane  skeletal  isomerization  over  sulfated  zirconia   catalysts   with   different   Lewis   acidity."  Chemical  Engineering  Journal ,  Vol.   134,  No.   1-3,  pp.  106 – 110.
[6] Sandeep,  K.S.,  Viswanadham,  N.  and  Garg, M.O.  (2013).  "Cracking  and  isomerization  functionalities  of   bi-metallic   zeolites   for   naphtha   value    upgradation ."  Fuel , Vol.  107,  pp.  432 -438.
[7] Laila I. A., Abdel -Ghaffar A. A, Sameh M. A.  and Ahmed   K.   A.   (2001).  "Hydroconversion   of   n-paraffins  in  light  naphtha  using  Pt/Al2O3  catalysts  promoted  with  noble  metals  and/or  chlorine." Applied  Catalysis  A: General, Vol.  205, No. 1-  2, pp.  125 – 130.
[8] Busto, M., Dosso, L.A., Vera, C.R.  and  Grau,  J. M.  (2012).  "Composite  catalysts  of  Pt/SO4– ZrO2 and  Pt/WO3 –ZrO2  for  producing  high   octane    isomerizate by  isomerization-cracking   of   long   paraffins."   Fuel  Processing  Technology,  Vol.  104,  pp. 128–135.
[9] Ducourty,  B.,  Szabo,  G.,  Dath,  J.P.,    Gilson,  J.P.  and   Goupil,   J.M., Cornet, D.  (2004).   "Pt/Al2O3 -Cl catalysts  derived  from   ethylaluminumdichloride :  Activity and stability in hydroisomerization of  C6 alkane ."   Applied Catalysis A: General ,  Vol .  269,  No.  1, pp.  203 –214.
[10] Travers, C.  (2001).  "Isomerization of light  paraffins " Chapter  6  in  '' Conversion  Processes '' .Petro leum   Refining,   Vol.  3 ,   Leprince, TECHNIP,  France.
[11] Christian, W.  (2005).   "Kinetic  studies  on  alkane  hydroisomerization  over   bifunctional  cata-lysts ."   M.Sc.  Thesis, Technische  Universität  München –Lehrstuhl für Technische Chemie II.
[12] Juan,  J.  M., Fernando, P., Paula, S.   and Jose, L.V.  (2005).   "Hydroisomerization  of  a  refinery naphtha  stream  over  agglomerated  Pd   zeolites ." Industrial  &  Engineering  Chemistry Research, Vol.  44, No. 24, pp.  13 – 21.
[13] Salehirad, F., Sadighi, S.  and  Shahram,  A.   (2017).   "Deactivation   of   Chlorinated   Pt/Al2O isomerization catalyst  using  water  containing  feed ."   International Journal of Chemical  Reactor Engineering. ”   Vol. 15, No. 4,  pp.1 -13.
[14] Roldán, R., Beale, A.M., Manuel Sánchez, M.S.,  Romero  -Salguero,  F.J.,  Sanchidrián,  C.J.,  Gómez,   J.P.  and  Sankar, G.  (2008).  "Effect of the impregnation  order  on  the  nature  of  metal  particles  of  bi - functional  Pt/Pd -supported zeolite Beta materials  and  on  their  catalytic  activity  for  the  hydroiso -merization  of  alkanes ."  Journal of Catalysis, Vol. 254, No.  1, pp.  12 – 26.
[15] Farid,  A.  (2010).   "Synthesis  and   Character ization  of  catalyst  Containing  Molybdenum  and  Tungsten and their application in paraffin isomerization ."  International Journal of Advances in Engineering & Technology, Vol. 2, No. 1, pp.  668- 676.
[16] Ahari,  J.S., Khorsand, K., Hosseini, A.A.  and Farshi,  A.  (2006).   "Experimental study of C5/C6 isomerization in light straight run gasoline (LSRG) over platinum mordenite zeolite. "  Petrol.  Coal, Vol. 48, No. 3, pp.  42– 50.
[17] Vijay,  S.  and   Wolf,  E.E.,  "A highly active and stable platinum -modified sulfated zirconia   Applied  Catalysis  A: General, Vol. 264, No. 1, pp.  125 – 130.
[18] Eswaramoorthi,  I.  and  Lingappan, N.  (2003). "Nickel Impregnated Pt/H-b and   Pt/H -Mordenite Catalysts  for  Hydroisomerization  of  n-Hexane ."   Korean Journal of Chemical Engineering,  Vol.  20,  No. 2, pp.  207- 216.
[19] Eswaramoorthi, I.  and Lingappan, N.  (2003). "Ni – Pt/H -Y  zeolite  catalysts  for  hydroisomeriza-tion of n-hexane and n-heptane ."   Catalysis Letters, Vol. 87, No. 3,  pp. 133- 142.
[20] Yuandong,  X.,  (2009).   "Promotion  effect  of  lanthanum  addition  on  the  catalytic  activity  of   zirconia  supported  platinum  and  tungstophosphoric acid catalyst for n-pentane isomerization."  Applied   Surface Science, Vol.  255,  No.   13,   pp.    6504 – 6507.
[21] Shahram Alijani,  Fatollah Salehirad, Mansour  Jahangiri  (2013 ).  "Synthesis and evaluation of new race of isomerization catalysts. "  1st  National  Industrial  Catalyst Conference, 20th &  21th  Feb.  Shiraz University. 
[22] Lyod L. (2011). Handbook of Industrial Catalysts.  Springer  Science and Business  Media   LLC., New York.
[23] Khurshid, M., Al-Daous, M.  A., Hattori,  H. and Al- Khattaf,   S.  S.  (2009).   "Effects  of hydrogen  on   heptane isomerization over zirconium oxide modified  with  tungsten  oxide  and  platinum ."   Applied  Catalysis A: General, Vol.  362, No. 1, pp.  75-81.
[24] Weyda  H.   and   Köhler  E. (2003). "Modern  refining  concepts  an  update  on  naphtha  isomerization  to modern  gasoline  manufacture."  Catal.  Today, Vol.  81, No. 1, pp.  51 – 55.
[25] Barrett,  E.P.,  Joyner,  L.G.  and   Halenda,  P.P.  (1951).  "The Determination of pore volume and area distributions in porous substances.  I.  Computations from nitrogen isotherms ."   Journal of the  American  Chemical Society, Vol. 73, No.  1,  pp. 373 – 380.
[26] Ali,  L.I.,  Ali,  A.G.A.,  Aboul -Fotouh,  S.M.   and  Aboul -Gheit, A.K. (2001)."Hydro-conversion of n-paraffins in light naphtha using Pt/Al 2O3   catalysts  promoted  with  noble  metals  and/or  chlorine ." Applied  Catalysis  A: General, Vol. 205, No.  1,  pp. 129 – 146.
[27] Blomsma,  E., Martens, J.A.   and  Jacobs P.A.  (1997).  "Isomerization and  hydrocracking of  hep- tane   over   bimetallic  bifunctional   PtPd/H-Beta  and PtPd/USY  zeolite  catalysts."  Journal of Catalysis, Vol.  165, No. 2,  pp.  241- 248.