Absolute Permeability Calculation by Direct Numerical Simulation in Porous Media

Document Type : Research Paper

Authors

Institute of Petroleum Engineering, School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Abstract

Simulating fluid flow at micro level is an ongoing problem. Simplified macroscopic flow models like Darcy’s law is unable to estimate fluid dynamic properties of porous media. The digital sample reconstruction by high resolution X-ray computed tomography scanning and fluid-dynamics simulation, together with the increasing power of super-computers, allow to carry out pore-scale simulations through digitally-reconstructed porous samples. The pore-scale flows which derived from computational fluid dynamic are then evaluated using the finite volume method implemented in the open-source platform OpenFOAM®. In this work to verify the solver in porous media we simulated fluid flow around sphere in body-centered cubic (bcc) lattice and calculated the dimensionless permeability for a wide range of radius and porosity; the results are comparable with those obtained by using carman-kozeny equation. Then this solver is performed on realistic sample to investigate the effect of sample size on calculated permeability and tortuosity and the mesh refinement levels for a fixed image resolution.

Keywords

References

[1] Coenen J, Tchouparova E, Jing X. Measurement parameters and resolution aspects of micro X-ray tomography for advanced core analysis. InProceedings of the International Symposium of the Society of Core Analysts, UAE.(SCA 2004-36) 2004 Oct.
[2] Flannery BP, Deckman HW, Roberge WG, D'AMICO KL. Three-dimensional X-ray microtomography. Science. 1987 Sep 18;237(4821):1439-44.
[3] Bear J. Dynamics of fluids in porous media–American Elsevier pub. Comp., Inc. New York, 764p. 1972.
[4] Whitaker S. Flow in porous media I: A theoretical derivation of Darcy's law. Transport in Porous Media. 1986 Mar 1;1(1):3-25.
[5] Spanne P, Thovert JF, Jacquin CJ, Lindquist WB, Jones KW, Adler PM. Synchrotron computed microtomography of porous media: topology and transports. Physical Review Letters. 1994 Oct 3;73(14):2001.
[6] Mostaghimi P, Bijeljic B, Blunt M. Simulation of flow and dispersion on pore-space images. SPE Journal. 2012 Dec 1;17(04):1-31.
[7] Boomsma K, Poulikakos D, Ventikos Y. Simulations of flow through open cell metal foams using an idealized periodic cell structure. International Journal of Heat and Fluid Flow. 2003 Dec 1;24(6):825-34.
[8] Gerbaux O, Buyens F, Mourzenko VV, Memponteil A, Vabre A, Thovert JF, Adler PM. Transport properties of real metallic foams. Journal of Colloid and Interface Science. 2010 Feb 1;342(1):155-65.
[9] Lemaitre R, Adler PM. Fractal porous media IV: three-dimensional stokes flow through random media and regular fractals. Transport in Porous Media. 1990 Aug 1;5(4):325-40.
[10] Thovert JF, Adler PM. Grain reconstruction of porous media: Application to a Bentheim sandstone. Physical Review E. 2011 May 23;83(5):056116.
[11] Khan F, Enzmann F, Kersten M, Wiegmann A, Steiner K. 3D simulation of the permeability tensor in a soil aggregate on basis of nanotomographic imaging and LBE solver. Journal of Soils and Sediments. 2012 Jan 1;12(1):86-96.
[12] Pazdniakou A, Adler PM. Dynamic permeability of porous media by the lattice Boltzmann method. Advances in Water Resources. 2013 Dec 1;62:292-302.
[13] Manwart C, Aaltosalmi U, Koponen A, Hilfer R, Timonen J. Lattice-Boltzmann and finite-difference simulations for the permeability for three-dimensional porous media. Physical Review E. 2002 Jul 29;66(1):016702.
[14] Andrä H, Combaret N, Dvorkin J, Glatt E, Han J, Kabel M, Keehm Y, Krzikalla F, Lee M, Madonna C, Marsh M. Digital rock physics benchmarks—Part I: Imaging and segmentation. Computers & Geosciences. 2013 Jan 1;50:25-32.
[15] Bear J. Dynamics of Fluids in Porous Media. Courier Corporation; 1988.
[16] OpenFOAM: The Open Source CFD Toolbox User Guide
[17] Patankar S. Numerical heat transfer and fluid flow. CRC press; 1980 Jan 1.
[18] Nabovati A, Sousa AC. Fluid flow simulation in random porous media at pore level using lattice Boltzmann method. InNew Trends in Fluid Mechanics Research 2007 (pp. 518-521). Springer, Berlin, Heidelberg.
Journal of Chemical and Petroleum Engineering
Volume 53, Issue 1
June 2019
Pages 91-100

Files

History

  • Receive Date: 19 January 2019
  • Revise Date: 11 March 2019
  • Accept Date: 23 April 2019

Share

How to cite

Statistics