Journal of Chemical and Petroleum Engineering

Journal of Chemical and Petroleum Engineering

Valorisation of waste polycarbonate through pyrolysis: Kinetic analysis and batch pyrolysis studies

Document Type : Research Paper

Authors
1 Department of Chemistry, VSSUT Burla
2 Department of Chemistry, Veer Surendra Sai University of Technology, Burla, Odisha, India
3 CIPET: IPT, Bhubaneswar, India
4 Department of Chemistry, Veer Surendra Sai University of Technology Burla, Sambalpur, Odisha, India
10.22059/jchpe.2026.410640.1710
Abstract
Abstract

The widespread use of polycarbonate in electrical and electronic equipment has contributed to the rapid accumulation of waste electrical and electronic plastics, posing significant environmental challenges. Sustainable recycling technologies are therefore essential for effective resource recovery. In this study, the isothermal and non-isothermal degradation kinetics of waste polycarbonate were investigated using model-fitting and model-free methods (KAS, FWO, and STR) to support pyrolysis reactor design. Batch pyrolysis was performed at different temperatures using a semi-batch reactor to yield pyrolytic oil. Non-isothermal degradation resulted in weight losses of 81%, 79%, and 77.5% at 5, 10, and 20 °C/min, respectively, within the temperature range of 460–540 °C, and followed an F3 mechanism with an activation energy of 142 kJ/mol. The reaction orders at 460, 500, and 540 °C were 1.355, 1.415, and 1.025, respectively, based on Avrami theory. Isothermal degradation of polycarbonate caused 74%, 78%, and 83.5% weight loss at 460, 500, and 540 °C, respectively, and followed an F1 mechanism with an activation energy of 32.444 kJ/mol. Polycarbonate exhibited optimum pyrolysis performance at a heating rate of 20 °C/min under non-isothermal conditions and at 500 °C under isothermal conditions. Batch pyrolysis produced a maximum oil yield of 65.05% at 540 °C, and the oil contained alkanes, alkenes, aromatic hydrocarbons, and oxygenated compounds as confirmed by FTIR and GC-MS analyses. This work aims to design a process for the pyrolytic degradation kinetics and reaction mechanism, and to develop a standard pyrolytic degradation process for the production of pyrolytic oil from waste polycarbonate.
Keywords
Subjects


Articles in Press, Accepted Manuscript
Available Online from 21 November 2026

  • Receive Date 10 February 2026
  • Revise Date 18 November 2026
  • Accept Date 21 November 2026